Lonsdor K518 Program VW Polo Smart Remote key

Lonsdor K518ISE Key Programmer support many Volkswagen group vehicles in key programming,support VW 4th&5th IMMO and reading pin code. Lonsdor K518 also Support VW Polo remote key programming. Here is a case about Lonsdor K518 program VW Polo 2009 4th IMMO NEC+24C32 smart remote key.

Lonsdor K518 key programmer supported VW car list and functions:

Program  VW Polo Key information:

Original key: 3-button folding remote key

Frequency: 433MHz

Chip type: Special ID48 chip (TP23)

Device to program: Lonsdor K518 key programmer

Lonsdor K518 Program Details steps:

Connect Lonsdor K518 host with vehicle via OBD diagnostic socket

Select Immobilizer->VAG->4th Immobilizer->Identify Immo type

Auto Scan Tool Lonsdor K518 identified immo type: 4th IMMO

Select NEC 24C32

Then Backup EEPROM and save data

Select Read Immobilizer data

Lonsdor K518 read vehicle information: VIN, CS, PIN, key number and key ID

Select Make Dealer Key

Push card slot on Car Key Programmer K518 main unit from right direction

Insert new key to be programmed into card slot

Select Key Learn

Enter key number to be programmed (keys that will start vehicle )

Insert key and turn ignition on one by one

I.E, Dashboard shows 1-2 means 1 key has been learnt, 2-2 means 2 keys have done

Program success.

Test remote and star car.