Digimaster 3 odometer correction master works with various types of adapter can support odometer correction, audio decoding, airbag resetting, engine ECU resetting, IMMO, and programming key for Benz &BMW etc. Here mainly share the guide to add new key to BMW by Digimaster 3 and 9S12 adapter.
Step-by-step guide to program BMW key:
Step 1: Enter Digimaster 3 main menu
Go to the BMW key programming page
Step 2: Make sure Digimaster 3 connect to the vehicle correctly, you can refer to the connection picture in the Help function
Step 3: Click “Step 1: CAS Reading”
After read the data, the following interface come up, the red key No. has been used.
Choose the Key No. you want and click “Next” to finish
Step 4: Select “Step 2: Key programming”
Place the key in the slot of the adapter (If the key is YH Key please make sure it was registered before programming)
Click “Next”. The pop-up dialogue will show the information of the current key
Step 5: Choose the Key No. you want to program, it will pop-up the tokens dialogue box, click “Next” to continue
Step 6: During the programming process it will prompt you the quantity of the used key and the key can be bond, click “OK”
When the used key has reached to 20, the key storage area was full, you need to go to the management center to update key list
Step 7: Connect the 9S12 adapter to Digimaster III, click “Step 3: CAS programming” to write the data back to the CAS
Please kindly notice:
If your BMW key was successfully programmed once, and you want to change to another key No. or another car, please contact our dealer.
Digimaster III BMW Key Programming List:
This is only one part of BMW car models Digimaster 3 supported, if you want to know full car list
Leave a Reply