Caterpillar ET 2021A 2019C Electronic Technician Software

What is CAT Caterpillar ET Professional Diagnostic Tools?
26-5
Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis.

Caterpillar ET Functions List:

1.View active and logged diagnostics.

2.View events where irregularities occurred and were logged by the ECM.

3.View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.

4.Record and log performance data.

5.Graph a group of status parameters.

6.View the current configuration of an ECM.

7.Change ECM configurations.

8.Perform diagnostic tests.

9.Perform calibrations.

10.Print reports and diagnostic results.

11.Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application

Caterpillar ET Support Languages:

English,Chinese,Danish,French,German,Italian,Portuguese,Spanish

Caterpillar ET Support OS:

Window 7,Window 8,8.1,Window 10 32 bit and 64 bit

PC Requirements

Recommended Configurations

PC containing a 2.0 GHz dual-core processor·

3GB RAM·

3GB of available hard disk drive·

DVD-ROM drive·

15.4 inch XGA Screen (1280×1024 compatible)·

MicrosoftÒWindows™ 7 Professionalor Windows 8 Professional

(Note: Windows 8 RT is not supported)·

RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·

USB 1.1 or 2.0 port (for use with Comm Adapter 3)·

Ethernet RJ45 connector·

Built in pointing device or mouse·

For security purposes, MicrosoftÒInternet Explorerversion 9 or newer is recommended.

Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.

Minimum Configurations

PC containing a Pentium 2 GHz processor or greater·

1GB RAM·

500MB of available hard disk drive·

CD-ROM drive·

Super VGA monitor or display (1024×768)·

MicrosoftÒWindows™ 7 Professional or Windows 8 Professional

(Note: Windows 8 RT is not supported)·

RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·

USB 1.1 or 2.0 port (for use with Comm Adapter 3)·

Ethernet RJ45 connector·

Built in pointing device or mouse·

For security purposes, MicrosoftÒInternet Explorer version 9 or newer is recommended.

Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.

26-1

Cat et Caterpillar Electronic Technician Software:
Brand: Caterpillar
Region: WorldWide
Support All cars of CAT

26-6

Diagnostic Software Caterpillar ET 2020A (replaces CAT ET 2019C) Electronic Technician Diagnostic Software
Type of catalogue:Diagnostic Software
Make:caterpillar
Region:WorldWide

What’s New – 2020A
Product Status Report Updates
The Product Status Report has been updated to include throttle configuration information.
Caterpillar ET Software 2019C Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application

What’s New – 2021A
No significant new features or feature enhancements

What’s New – 2020C
No significant new features or feature enhancements

What’s New – 2020B
Trainer Update – 299D3
The 299D3 Skid Steer Loader has been added to the Trainer application.

What’s New – 2020A
Product Status Report Updates
The Product Status Report has been updated to include throttle configuration information.
Built-in Factory Password Generator
The experimental feature allows you to decode (18-Bit passwords not supported) factory passwords

What’s New
What’s New – 2019C
Indication of Selected Communications Adapter

The service tool now displays the selected communications adapter when the service tool is disconnected. The adapter name is displayed in the status area at the bottom right of the service tool window.

End of Support for Windows 7

Microsoft is ending extended support for Windows 7 as of January 2020. The service tool will be ending support for Windows 7 as of the 2020A release.


www.cnautotool.com

Be the first to comment

Leave a Reply

Your email address will not be published.


*