AUTOBOSS V30 Elite Auto diagnostic Scanner

AUTOBOSS V30 Elite  ( http://www.cnautotool.com/goods-4363-Original+AUTOBOSS+V30+Elite+Two+Years+Free+Update+Online.html ) is a good auto scanner. It can works for multi-brand vehicles. It has graphing and data, adaptations and performs actuations. Its function is not only reading & clearing fault codes, but also goes far accesses and beyond the complete vehicle, including: body, chassis, drive line, and the networking/communication modules. AUTOBOSS V30 Elite Super Scanner  covers more than 57 makes, 40000 vehicle systems. And it has a quick test function to diagnose the complete vehicle.
Autoboss V30 Elite(http://www.autonumen.com/goods-4535-AUTOBOSS+V30+Elite+Super+Scanner.html) Super Scanner Description: Autoboss V30 Elite Super Scanner is a new scanner made by Autoboss(SPX), The V30 coverage Tspans over 57 manufacturers with up to 148 systems per vehicle. Best of all, the V30’s vehicle coverage continues to grow, with simple internet-ready updates accessible to you at the click of a button.
This is just a brief introduction about AUTOBOSS Elite. If you want more info, please visit http: //www. autonumen. com/goods-4535-AUTOBOSS+V30+Elite+Super+Scanner. html.
Special Functions:
Self-Learn function enables the scanner to learn and save correct values for ECU live data parameters from a vehicle in good condition. For example, it will learn that on a Vauxhall Astra 1. 7 diesel the coolant temperature sender should be reading between 0. 5 to 4. 5 V.
Comparison function can compare the learned values against the vehicle you are working on and highlight values which are out of range.
Record function enables users to record the vehicle data when testing the vehicle. And users can send the recorded data back to V30 elite super scanner(http://www.autonumen.com/goods-4535-AUTOBOSS+V30+Elite+Super+Scanner.html) head office for analysis, which will help users solve problems faster.
Navigation bar makes this tool more user-friendly.
AUTOBOSS V30 Elite Super Scanner  Covering car diagnostic tool latest and early car models of Asian, European, American and domestic.
-You can use 80%-90% functions of the original scanner on many cars.
-Supporting CAN- BUS diagnosis of Volkswagen / Audi, Ford, Mazda, Nissan, Hyundai / KIA.
-Built-in high / low speed CAN- BUS and single CAN- BUS.
-Making all CAN- BUS systems available with only one connector.
-Supporting 5 OBDII protocols and 9 modes.
-Nissan idle speed adaptation.
-Immobilization system generation III adaptation of Volkswagen.
The equipment can be used as original one with most of cars. 80%-90% functions of the original equipment can be used in a few car models.
VW / Audi: All CAN- BUS system after 2005
GM: The testing function has covered 90% of the GM original equipment
Toyota: The actuation function is the same to the original equipment
Nissan: Covering 95% function of the original equipment
Honda: Only system selection is needed for diagnostic scanning
Hyundai / KIA: More than 90% function coverage of the original equipment
All systems of all car models are available
Opel: 17 models can be tested and the basic function makes no difference of the original equipment
AUTOBOSS V30 Elite Specification:
CPU: SAMSUNG ARM9 2410A, 200MHz
Memory: 64M
Flash card: SD card, 8G
Display: 7” Wide VGA (800×480) Ultra Bright TFT
Power supply: DC 8~15V, AC 110~250V 50Hz
Port: Diagnostic port, COM port, USB port, Power port
Operating system: WINDOWS CE
Storage temperature: -30~85ºC
Working temperature: -10~70ºC
Humidity: <90%
Package Dimension(mm): L665*W218*H470

« »

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>