Archives : May-2019

Do I need a BMW FEM Test Platform to do FEM keys? How to use?
31 May
12:43

Do I need a BMW FEM Test Platform to do FEM keys? How to use?

Do I need a FEM test platform to do FEM keys using Xhorse VVDI2? The answer can be “yes or no”. That is, you can program a fem key with or without a test platform. Because with the test platform, you can do it on the car directly. It will…

How to read MSV80 by CGDI Prog BMW Key Programmer?
31 May
12:39

How to read MSV80 by CGDI Prog BMW Key Programmer?

CGDI Prog BMW Key Programmer is high technical products which mainly performing auto diagnosis, key programming and security maintenance. CGDI Prog BMW MSV80 Key Programmer support CAS1, CAS2,CAS3,CAS3+, CAS4 /CAS 4+/FEM/BDC key programming and all key lost. CGDI-Prog BMW MSV80 Main Function: Auto diagnose Programming Security maintenance Free Download CGDI…

CG Pro 9S12 Read & Write 35160WT Dashboard EEPROM: Confirmed!
29 May
1:20

CG Pro 9S12 Read & Write 35160WT Dashboard EEPROM: Confirmed!

Question: Anyone tried with CG Pro 9S12 and 35160WT adapter ? Answer: I bought it just to try it… 160DOWT without Problems… 160DOWQ without Problems… Need the Adapter for WT For 35160WT, you need extra adapter and also to choose Auto key Programmer in options, you’ll have to connect this adapter on…

CG Pro 9S12 3-in-1 Programmer for BMW Land Rover Porsche
27 May
1:30

CG Pro 9S12 3-in-1 Programmer for BMW Land Rover Porsche

CG Pro 9S12 Freescale programmer, the next generation of CG-100, can perform automatic conversion BMW, Mercedes-Benz kilometer and BMW, Land Rover, Porsche key matching. It combines both CGDI BMW MSV80 key programmer and CGDI MB Mercedes key programmer. Features Support Freescale 705 series Support Freescale 908 series Support Freescale 711…

CGDI Prog MB Reviews (Updated on 02.2019)
26 May
12:49

CGDI Prog MB Reviews (Updated on 02.2019)

CGDI MB reviews: Have collected CGDI programmers feedback of tests on Mercedes. Credits to all contributors off www.cnautotool.com w164: i did it today (EIS on bench) w164 eis A1645451508 new type pulling dump took 80 minutes calculating pass online 4 min. key programmed !!! w164: W164 need gateway w164 2006:…

Free Download F-series psdzdata Coding Database for CGDI BMW
24 May
12:52

Free Download F-series psdzdata Coding Database for CGDI BMW

Here CnAutotool.com engineer shares CGDI Prog BMW F series coding/programming database free download link. CGDI BMW psdzdata database free download After complete download, you’ll get this file: Extract the file The folder contains these files shown as below. Right click the CGDI BMW icon on the desktop, choose the option “Open the…

How to Write Mercedes Original Key through the CGDI MB NEC adapter
23 May
1:38

How to Write Mercedes Original Key through the CGDI MB NEC adapter

How to: write Mercedes original key with CGDI Prog MB Key Programmer through the NEC adapter. Please insert the key into CGDI MB device Click ”Read”, show related key information Disassemble the key, take the chip out, and solder it to the NEC adapter Read key, view related information c Reset…

How to change BMW CAS3 MSD80 DME using CGDI BMW
22 May
2:34

How to change BMW CAS3 MSD80 DME using CGDI BMW

How to: change replace the BMW CAS3 MSD80 DME Engine Computer using CGDI Prog BMW Key Programmer. When is required: A secondhand/used DME (MSD80) was to used to replace the original DME (MSD80) Model example: BMW E83 CAS3 DME MSV80 Procedure: Connect CGDI BMW with vehicle via OBD socket Open…

CGDI BMW F-series FEM Body Coding and Programming Guide
21 May
12:55

CGDI BMW F-series FEM Body Coding and Programming Guide

CGDI Prog BMW  is not only able to program keys, read ISN code, but also do ECU coding and programming. Here’s the factory guide to code/program F-series module, i.e FEM Body as an example. CGDI BMW FEM Body Coding: Connect CGDI MB with vehicle via OBD socket through main test cable…

This help file basically includes 4 parts: Function, Operation, Attention, and  Reference.
19 May
9:18

This help file basically includes 4 parts: Function, Operation, Attention, and Reference.

Function 1. The backup immodata: please refer to the “Operation” to backup immodata, after that program and delete key can be proceed; 2. Add smart key: to program smart card, add key and all key lost have the same operation; 3. Delete smart key: delete all the programmed smart cards….