Category Archives: Mb Star

DTS Monaco 8.14.016 Work Good for 2019.09 MB SD C4 DoIP and Benz ECOM
07 Sep
10:54

DTS Monaco 8.14.016 Work Good for 2019.09 MB SD C4 DoIP and Benz ECOM

What is DTS-monaco ? 1.DTS-monaco is the official software used by Daimler Benz development engineers 2.DTS Monaco is universal engineering test terminal for the diagnosis and control function of the vehicle controller, The name Monaco is derived from the modular analyzer used in vehicle traffic 3.DTS Monaco covers all the…

MB SD Connect Compact 4 Star Diagnosis WIFI Setting Manual
03 Sep
3:40

MB SD Connect Compact 4 Star Diagnosis WIFI Setting Manual

MB SD Connect Compact 4 Star Diagnosis WIFI Setting Manual We know The MB SD Connect Compact 4  can connecting with Both Lan cable and WIFI, some customers might have question and problem about how to setting WIFI.  www.cnautotool.com  share with you about WIFI setting on SD Connect C4 How…

2019 vs 2018 Xentry OpenShell XDOS
27 Aug
11:51

2019 vs 2018 Xentry OpenShell XDOS

Xentry new vs old look: 05.2018 Xentry (Windows 7 x32) Old style Xentry: 05.2019 Xentry (Windows 7 x64) New Style Xentry: the latest xentry openshell: 07.2019 Maybe the patch to make it work at 32 bits has something to do with it …

VXDIAG BENZ Star C6 Work Perfectly on Mercedes-Benz R300 & 221 ME9.7
21 Aug
1:54

VXDIAG BENZ Star C6 Work Perfectly on Mercedes-Benz R300 & 221 ME9.7

VXDIAG XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on…

How to Setting MB SD Connect C4 PLUS DoIP WiFi Wireless Connection?
20 Aug
1:32

How to Setting MB SD Connect C4 PLUS DoIP WiFi Wireless Connection?

The new SDconnect C4 (1:1 clone of the original) is able to work for DoIP. It’s the only C4 that supports ethernet communication (DoIP). Tested no issues on new mercedes with doip. New MB Star SD Connect C4 PLUS DoIP diagnostic multiplexer enables WiFi/WLAN and USB connections. There have customer…

SD C4 PLUS set new IP to communicate with Benz DOIP
11 Aug
3:23

SD C4 PLUS set new IP to communicate with Benz DOIP

Have one Mercedes Benz sdconnect C4 Plus (1:1 clone of the original) to communicate the DOIP protocol and perform diagnostic features, you are required to configure a new IP address of your computer Local Area Connection. Only after this, can SD C4 PLUS communicate with the Benz DOIP. This article…

V2019.7 MB SD C4 plus vs. Mercedes-Benz XENTRY VCI C6
07 Aug
7:57

V2019.7 MB SD C4 plus vs. Mercedes-Benz XENTRY VCI C6

What’s the difference between New SDconnect C4 and Mercedes-Benz VCI C6 diagnostic system? Check details below: Differences: V2019.7 MB SD C4 plus Price: 409 euro Features: 1)Supports old Mercedes with DAS software 2)Supports new Mercedes with DoIP protocol 3)With free DTS, Monaco, Vediamo and HHT-WIN 4)No need battery for firmware update 5)Connected…

Possible to have SDconnect C4 with DoIP enabled? C4 2019 says YES!
13 Jul
6:44

Possible to have SDconnect C4 with DoIP enabled? C4 2019 says YES!

Hello bros. Here you will have a new SD connect C4 version 2019, with lots of improvement like Ethernet communication, battery update, pcb update for high quality… in detail… Ethernet communication (DoIP)– enabled! The new SDconnect C4 released in 2019 (1:1 clone of the original) is able to work for…

How to Set Wifi Connection for Mercedes SD C4/C5?
14 May
1:24

How to Set Wifi Connection for Mercedes SD C4/C5?

Mercedes SD C4 is professional diagnostic and programming tool for Mercedes Benz cars and trucks. When you received the SD Connect 4/C5 multiplexer, you may would like to connect it with wireless for works. VXDAS here provide full steps to set the wifi connection for you. Mercedes SD C4 Overview:…

(Solved) SDC4 setting failure and configuration don’t work
11 May
7:03

(Solved) SDC4 setting failure and configuration don’t work

Solution to the failure of Mb Star C4 setting and configuration don’t work. Unscrew This is correct wiring diagram. Right click on the icon “StartKeyCenter”, then “Properties” – “Find target” On the desktop, right click on “StartKeyCenter”, then option “Properties” – “Find target” – “Mercedes Benz” – “Sdconnect ToolKit”, rename the…