Tips on how to Enable IMMO and Programming in Consult

Here is how you can Enable IMMO and Programming in Seek advice from Nissan Consult 3 Plus with no spending out on the intelligent card.

Find the seek the advice of diagnostictool.ini file
open with notepad
copy and paste this at the bottom

Here for Seek the advice of Nissan Consult 3 Plus:

C:\CONSULT-III_plus\System\Application\ApplicationData\CommonSetting\DiagnosticTool.ini

Instruction:
[current_geographical_zones]
market=2
area=3
country=USA
[current_language]
language=GB
[unit_conversion]
unit_conv_1=G001.S002
unit_conv_2=G002.S004
unit_conv_3=G003.S006
unit_conv_4=G004.S009
[current_channel]
channel=0
[system_management]
access_mode=1

[device]
vi_device_name=J-Box
[vehicles]
tab_index=2

[mode]
debug_mode=TRUE
debug_mode_vehicle_battery=TRUE
[vehicles]
tab_index=0
That is operating on my setup
Copy this into your diag.inx folder transform the area location and J2534 name and also you needs to be good to go .

FAQ
Q1: What is the difference among Nissan consult 3, consult 4 and Nissan consult 3 plus? Can Nissan consult 4 remap ECU and change IGN time-limited parameter?
A1:
1) Nissan consult 3 and consult 4 share the same software version and parts, the difference between them is the appearance and the quality;
2) Nissan consult3 plus is the newest-released Nissan diagnostic  it supports the Nissan up to 2018 year. And only Nissan Consult 3 Plus can support programming.

Q2: What additional card needed when use Nissan Consult-3 plus to make key?
A2: It need additional card, it needs for making key, this card is Nissan Consult-3 plus Security Card, otherwise the button “Immobilizer key” is gray color and is unavailable

Q3: Can i use this nissan consult 3 plus to program tcm and bcm?
A3: Yes, but you need to have the program file.

Q4: Does your Nissan consult 3 plus contain Battery registration card?
A4: No, it doesn’t.

Q5: Do you have any instruction for software installation?
A5: Yes. There is the software installation video on our website. There is the software installation manual in the package too. You can follow them to install the software. Attention: Nissan consult software must be installed on XP system.

Q6: Can i use your nissan consult 3 to program tcm and bcm?
A6:This nissan consult 3 plus at CnAutotool.com support this two function. But if you want to use this two function, you need have the programming file by yourself.

Q7:Could be the Seek the advice of 3+ working a 100% with J2534?
Do I will need any further files or media to download to become in a position to program?

A7: You happen to be pretty limited working with a Pass-Thru with Seek advice from software I believe. Study and Delete fault codes yes. Programming and Safety I think not. Ideal to utilize a Consult3 or 3+ interface. You’ll be able to plan working with Nissan Ners software with a Pass-Thru although.