The Autel MaxiIM IM608 is better bang for buck you can do vehicle programming through j2534 anyway. With a MaxiFlash JVCI J2534 ECU programmer, you can do a bit more with the OEM subscription.
Autel MaxiIM IM608 J2534 programming: reprogramming / key programming / multi-line OEM diagnostics
supports over 2,000 vehicle protocols
Ethernet & USB programming connectivity
Wi-fi upgradable thru firmware updates
built-in operating system / internal program
To perform J2534 programming with MaxiIM, you’ll need:
Autel MaxiIM IM608 & MaxiFlash JVCI J2534 ECU programmer (IM508 cannot)
A PC/laptop
Network connection
manufacturer’s online account / OEM subscription
A vehicle with a battery maintainer connected
Look at Autel MaxiIM J2534 function list:
Each OEM has a special site that allows you to gain access to their programming software. All you need is a credit card to purchase a subscription, and knowledge on how to download and install the software ( This is the most difficult part about programming).
MANUFACTURER WEBSITE DIAGNOSTICS KEY PROGRAMMING CAPABLE
Acura ServiceExpress.Honda.com Yes – Dealer Level Yes★
Audi Erwin.AudiUSA.com Yes – Dealer Level Yes★★
BMW Bmwtechinfo.com Yes – Dealer Level Yes – Key Synchronization (not new leys).
Chrysler Techauthority.com Yes – Dealer Level Yes-2004+ (CAN vehicles)★ ◆
Ford Motorcraftservice.com Yes -2018+ Yes★
General Motors (GM) ACDelcoTDS.com Yes – Dealer Level Yes★
Honda ServiceExpress.Honda.com Yes – Dealer Level Yes★
Hyundai Hyundaitechinfo.com Yes-2018+ ★
Infiniti lnfimti-techinfo.com Yes-2018+
Isuzu lsuzutechinfo.com Yes – Dealer Level Yes
Jaguar JaguarTechinfo.com Yes – Dealer Level Yes-2017> (DOIP Required) ★
Kia Kiatechinfo.com Yes-2018+ ★
Lamborghini Yes – Dealer Level Yes★ ◆
Land Rover LandRoverTechInfo.com Yes – Dealer Level Yes-2017+ (DOIP Required)★
Lexus TechInfo.Lexus.com Yes – Dealer Level Yes★
Mazda MazdaTechInfo.com Yes-2018+ Yes★
Mercedes Benz StarTekInfo.com Yes-2018+
Mini MiniTechInfo.com Yes – Dealer Level Yes – Key Synchronization (not new keys)◆
Mitsubishi MitsubishiTechInfo.com Yes – CAN Vehicles Yes • CAN Vehicles ★
Nissan Nissan-TechInfo.com Yes – 2018+
Porsche Techinfo.Porsche.com Yes – Dealer Level Yes
Subaru Techinfo.Subaru.com Yes – Dealer Level Yes – 2015+ most models)
Suzuki Suzukipitstopplus.com
Toyota Techinfo.Toyota.com Yes – Dealer Level Yes★
Volkswagen Erwin.VW.com Yes – Dealer Level Yes★◆
Volvo VolvoTechinfo.com Yes – Dealer Level Yes – 2017+ DOIP (Nol all) ★
★ Required NASTE for keys
◆ To use J2534 Needs precoded dealer key
2
Autel IM608 J2534 Programming FAQs:
Q: Does the IM608 do any pcm programming through the j2534 or does it just use the j2534 for key and immobilizer programing?
A: Yes you can use the j2534 to program PCM ( you need an OEM subscription and a laptop to do this). You can do key coding directly from the scanner. You don’t need an OEM subscription.
Q: Will the im608 retain all of its key programming abilities if I don’t continue the subscription to Autel??
A: Generally speaking you can use the im608 doesn’t need a subscription in order to work. But there are some manufacturers that require a valid subscription in order to connect to the internet to do the key learning procedure.
Q: Will the Im608 reprogram/program a 2008 Chevrolet suburban Transmission control module?
A: The J2534 and and OEM subscription will allow you to do that . It comes with the IM608.
Q: Will IM608 do Mercedes and BMW online programming like MaxiSys Elite?
A: It can read and write EEPROM data from the old ecu to new ecu for both Mercedes and BMW.But can’t do online calibration for both cars.You can do BMW and Mercedes programming if you have old ECUs. Thats where G-BOX 2 comes in. But do not worry,the IM608 J2534 can do BMW & Mercedes Benz online calibration /Programming at maximum of $60 for daily subscription.
Q: I want to replace and program the PCM for Chrysler Town And Country. Is this possible with the im608? Where do i get the software for the laptop?
A: Yes you can do it with the IM608. You can get the directory of all the OEMS tech info site from Nastf.org. The actual programming files for the new blank ECU came off an online OE program with a purchased subscription from Chrysler using the Maxi J2534 as the Pass through device between the Windows PC and the vehicle .The car needs a battery maintainer connected. The J2534 needs a USB cable attached between it and the laptop, and the laptop needs a good high speed internet connection. Not always easy to pull off when working mobile.
And the right connection among MaxiIM IM608, XP400, J2534 and the vehicle:
website sale@cnautotool.com
Leave a Reply