How to change BMW CAS3 MSD80 DME using CGDI BMW

May 22, 2019 Eva Auto key Programmer 0

How to: change replace the BMW CAS3 MSD80 DME Engine Computer using CGDI Prog BMW Key Programmer.

When is required:

A secondhand/used DME (MSD80) was to used to replace the original DME (MSD80)

Model example:

BMW E83 CAS3 DME MSV80
cgdi-bmw-replace-msd80-engine-1

cgdi-bmw-replace-msd80-engine-2
Procedure:

Connect CGDI BMW with vehicle via OBD socket

cgdi-bmw-replace-msd80-engine-3

Open CGDI software and select BMW ISN

cgdi-bmw-replace-msd80-engine-4

MSV80 Wiring diagram

cgdi-bmw-replace-msd80-engine-5

Click to read DME ISN

cgdi-bmw-replace-msd80-engine-6

Make sure the battery has enough power and not disconnected

cgdi-bmw-replace-msd80-engine-7

The procedure takes about 5 minutes. Please be patient

cgdi-bmw-replace-msd80-engine-8

CGDI BMW Read DME ISN successfully

cgdi-bmw-replace-msd80-engine-9

Read the CAS ISN

CAS ISN read successfully

cgdi-bmw-replace-msd80-engine-10

Copy the DME ISN to the position of CAS ISN and write it

cgdi-bmw-replace-msd80-engine-11

Please insert the key and confirm the ignition switch is turned on

cgdi-bmw-replace-msd80-engine-12

Written CAS ISN success

Related posts:

  1. CGDI BMW F-series FEM Body Coding and Programming Guide
  2. CGDI prog BMW read N13, N20 and N55 ISN without unsoldering: All OK
  3. CG AT-200 vs. CGDI Prog BMW Programmer
  4. How to read MSV80 by CGDI Prog BMW Key Programmer?

Be the first to comment

Leave a Reply

Your email address will not be published.


*