PCMTuner Read and write VW bosch EDC17C62 ECU Well

June 26, 2022 Eva Car Diagnostic Tools 0

PCMTuner Read and write VW bosch EDC17C62 ECU Well-1
Want to know  the PCMtuner can do EDC17? Of course, that can test on WW

Golf 2.0 TDI EDC17C64 perfectly. There is no problem for reading, writing, checksum correction is all done. and so many customer still worried about writing with PCMTuner. This was done on bench mode.PCMTuner confirmed OBD mode also works.

After setting up the software, select the corresponding protocol and connect EDC17 following the
schematic diagram

Here attached the picture to show process when we tested the Bosch as below:
PCMTuner Read and write VW bosch EDC17C62 ECU Well-2 PCMTuner Read and write VW bosch EDC17C62 ECU Well-3 PCMTuner Read and write VW bosch EDC17C62 ECU Well-4 PCMTuner Read and write VW bosch EDC17C62 ECU Well-5 PCMTuner Read and write VW bosch EDC17C62 ECU Well-6 PCMTuner Read and write VW bosch EDC17C62 ECU Well-7

PCMTuner Read and write VW bosch EDC17C62 ECU Well-9 PCMTuner Read and write VW bosch EDC17C62 ECU Well-10

PCM Tuner Write EDC17 data successfully.

If read write no problem but control unit fault code no car start, it is because of the bad checksum, must be done in winols, especially if using Dpf /EGR off software.

Agian why would be risky? The software is the same as the original pcm flash, they just cloned the
dongle nothing changed in the software, with an original scamatik it’s safe like the original.

If you want to learn more about the PCM, you can contact with us: sale@cnautotool.com

Related posts:

  1. Kess V2 Clone – Safe to Read/Write ECUs thru OBD?
  2. How to use Ktag to read/write Ford EDC17 ECUs
  3. CG Pro 9S12 Read & Write 35160WT Dashboard EEPROM: Confirmed!
  4. User Manual for Autel XP400 Adapter Used with Autel IM608 to read/write transponder

Be the first to comment

Leave a Reply

Your email address will not be published.


*