VXDIAG XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC.
More details , please check here
https://www.cnautotool.com/goods-6740-VXDIAG-MB-SD-Connect-C6-MB-Star-C6-Benz-Diagnostic-Tool.html
There have customers have used VXDIAG C6 work on Mercedes R300 and 221 ME9.7
Lets check his experience as bellow :
1.VXDIAG Benz C6 Xentry test on Mercedes Benz W251 R300
Connect vxdiag c6 benz with vehicle and laptop
The indicator lights up
Indicating that the connection has been successfully connected
Open the XENTRY software
Choose your own model for diagnosis
Note: If the model series you are looking for is not listed here, switch directly to your replacement parts ordering system or the workshop information system. Other model series can then be selected there.
Click “F2” to determine the vehicle data
Select the quick test and click “F3” to confirm
The system will quickly test the vehicle control unit
Press “F4” switching to control units with fault codes and events
View car fault codes and delete them follow the prompt below
“Do you really wish to erase fault memory? If you delete fault codes, stored events will also be deleted.”
Check engine at cold start and in warming-up phase
Actual values
Full list of fault codes and events
Complete list of guide tests
Control unit adaptations, incl. variant coding, learning processes, correction programming and control module programming
Diagnose each module, i.e CGW- Central gateway diagnosis
2.Vxdiag Benz C6 DoIP work on Mercedes 221 ME9.7 SCN coding online
Go to XENTRY software
Determinate vehicle data automatically
Select “F2” to determine data
Communication with control unit AAC is being established
Click “F3” to determine data
Select “ME 9.7-Motor electronics 9.7” -> “F3”
Communication with control unit ME 9.7 is being established
Select “Control unit adaptations”-> “Variant coding” to determine data
Select “SCN coding”-> “F3”
Loading the data record…
User data are checked
Click “F3” to login in XENTRY software with user name and password
Verification of access authorization to establish an Internet connection
SCN coding data are being requested from headquarters…
The coding is being carried out…
Follow the prompt to switch off ignition
Please wait 10s
Then switch on ignition
CONTROL Module reset, please wait…
Enter the repair order number and click “F2”
Note: The order report has not yet been printed out. Do you want to close the file without making a printout?
Click “YES” to continue
Writing log file
More request for this tool , welcome to check our website : www.cnautotool.com
Or contact our sales : sale@cnautotool.com
Thank you
Leave a Reply