VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide

Here CnAutotool show the VXDIAG oem C6 Doip software registration and firmware update guide,hoep it helps!

1.2019.12 Xentry and DAS do not need to be activated, use directly.
2.Use one USB cable to connect VXDIAG OEM C6 and the computer to run DTS Monaco super engineering software (dts is activated with usb).
3.epc, wis software activation steps:
vxdiag-c6-doip-software-registration-and-firmware-update-01 vxdiag-c6-doip-software-registration-and-firmware-update-02

Login account: admin, password: 12345

vxdiag-c6-doip-software-registration-and-firmware-update-03
vxdiag-c6-doip-software-registration-and-firmware-update-04

Note: after opening epc-wis browsed, if you can see lan-id is unknown, the reason is the computer wasn’t installed with NIC driver or you need to uninstall and reinstall the NIC driver.
vxdiag-c6-doip-software-registration-and-firmware-update-05 vxdiag-c6-doip-software-registration-and-firmware-update-06

Driver installation:
vxdiag-c6-doip-software-registration-and-firmware-update-07 vxdiag-c6-doip-software-registration-and-firmware-update-08

1.Open VX Manager (open www.vxdiag.net, scroll down to download the newest version)

2.Click on “Diagnostic”, then “Benz” icon. If “Install” option light up, click on it; if it is gray, driver is installed successfully (Note: the computer needs to be connected the network, OEM C6 needs to be connected to the car and one computer).
vxdiag-c6-doip-software-registration-and-firmware-update-09

Be the first to comment

Leave a Reply

Your email address will not be published.


*