Firmware Flash on CAT Comm Adapter 3 CAT Caterpillar ET Diagnostic Adapter III

Cat et Caterpillar Electronic Technician Software:
Brand: Caterpillar
Region: WorldWide
Support Multi-language：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Support All cars of CAT

2021A is an upgraded version of 2020C , A represents the first quarter, and C is the software updated in the third quarter.

2021A Cat ET software as Cat Caterpillar ET 2018C 2019A 2019C 2020C Software update version, 2021A Caterpillar Electronic Technician software With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2021.

Best Quality 2021A CAT Caterpillar ET Diagnostic Adapter III：

Update the firmware:
1)Connect CAT Comm Adapter 3 (CA3) to Diagnostic Port on the Engine (Key switch: ON).
2)Open CAT Communication Adapter 3 Toolkit

3)Select the middle Application Firmware Flash icon button which displays the options for firmware upgrades, or through Utilities – Reprogram CA3 menu.

4)Select a file to flash by clicking Select File, browse to (default: Program Files/ Program Files x86 – Caterpillar Inc – Comm Adapter 3 – Firmware) and select the file.

5)Click Open.

6) Click Begin to send the file. Files of the type “.bz2” for example, “CA3_1.23.54.tar.bz2”.

7)The file transfer takes approximately 2 minutes, at which point the following
dialog box with the following message will display: “The file transfer was successful. Please wait while the CA3 is reprogrammed and then resets”. Click OK.

8)The CA3 Display Indicator Lights flashes in sequence while the new firmware is installed. When the installation is complete, the lights stop flashing. The entire transfer and installation process takes less than 4 minutes.