Lonsdor K518S Add New Key for Honda CR-V 2015

Here CnAutotool share you the test report on Lonsdor K518S program new key for Honda CR-V 2015.In this case it is a adding key testing,you need to working key.

Procedures:

Connect Lonsdor K518S to Honda CR-V obd port,then enter menu to select “Immobilization”

Select “Honda”

Select from vehicle

Select “CR-V”

Select “2012-”

Immobilizer

Now we need to check which IMMO type can do this vehicle model,select “Search IMMO type”

Immo type

Now switch ignition ON

Here Lonsdor K518 show you need to use “immobilizer system 2”

Back menu to select “IMMO2”

Add one key

And insert registered key and switch ignition

Switch ignition off in 15 seconds

Use an original key within 17 seconds to switch ignition on

Switch ignition off in 17 seconds

Switch ignition on with a new key in 20 seconds

Switch ignition off in 17 seconds

Switch ignition on within 20 seconds without replace key

Switch ignition off in 15 seconds

Switch ignition on

It will prompt you “Is immobiliser light off?”Press “OK” to continue

Switch ignition off in 15 seconds

Switch ignition on

Now key programming successfully

Keys programmed:3

Check all keys to ensure each can start car engine

Programming complete

Done!