Category Archives: Auto Scanner Tools

SD C4 PLUS set new IP to communicate with Benz DOIP
11 Aug
3:23

SD C4 PLUS set new IP to communicate with Benz DOIP

Have one Mercedes Benz sdconnect C4 Plus (1:1 clone of the original) to communicate the DOIP protocol and perform diagnostic features, you are required to configure a new IP address of your computer Local Area Connection. Only after this, can SD C4 PLUS communicate with the Benz DOIP. This article…

Volvo VIDA Dice vs. VADIS Diagnostic Scanner
09 Aug
7:27

Volvo VIDA Dice vs. VADIS Diagnostic Scanner

First, will explain what VIDA, DICE and VARDIS are: VIDA is the current diagnostic system used on Volvos with an OBD II port (Vehicles after S40 I/V40 I). VADIS is the old diagnostic system used on Volvos with no OBD or with rudimental OBD facilities until incl. S40 I/V40 I….

How to Use Ford VCM II Scan tool to Read and Clear Mondeo DTCs?
01 Aug
6:36

How to Use Ford VCM II Scan tool to Read and Clear Mondeo DTCs?

There have some customers dont know how to read & clear mondeo DTCs with our ford vcm ii , please check the steps as following : Open IDS software Select “Start New Session”-> “All other” Establishing communication to PCM Select vehicle specification Confirm the vehicle is fitted with a monochrome…

GM Tech 2 Clone Reliable or Not? Purchase – Package – Programming Tips
11 Jul
6:34

GM Tech 2 Clone Reliable or Not? Purchase – Package – Programming Tips

This is advice for those have problems: – what do you think of Tech 2 made in china? – Is there any software close to Tech 2 to be bought which has access to all hummer h2 modules? Many thanks all contribution from MixManSC like to share his experience with…

JLR SDD V157 where to download driver and how to setup on win7 8 10?
01 Jul
4:05

JLR SDD V157 where to download driver and how to setup on win7 8 10?

JLR SDD V157 software is tested working greatly with all Mangoose JLR interfaces & JLR DoiP VCI . uobdii.com is generous to share the Mongoose driver so that the computer find a driver for it for the Mongoose JLR, also share the Patch so that SDD V157 full software needs no…

VAS 5054A ODIS V4.4.1 For VW Audi
12 May
1:21

VAS 5054A ODIS V4.4.1 For VW Audi

VAS 5054A V4.4.10 is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers,mainly do AUDI VW Seat Skoda, newly add Bentley and Lamborghini. It is bluetooth version, and it supports multi-language. VAS 5054A Descriptions: 1. Software Version: ODIS V4.4.1 2. Supported…

2016 Audi MQB NEC35xx Add Keys: VVDI2 Done!
02 May
2:15

2016 Audi MQB NEC35xx Add Keys: VVDI2 Done!

Success! XHORSE VVDI2 VAG is able to add a new MQB key to Audi 2016. With MQB authorization enabled! Purpose: Add a new key Vehicle: Audi 2016 Instrument: H02 6423 Instrument type: MQB NEC35xx Hardware: VVDI2 Xhorse Software version: VVDI2 VAG 6.5.1 MQB authorization: Free authorization for those with vvdi2 full…

Piwis 2 For Porsche Scanner Diagnostic Application Guide
27 Apr
9:04

Piwis 2 For Porsche Scanner Diagnostic Application Guide

Piwis 2 Porsche Scanner Starting Diagnostic Application Piwis 2 for Porsche Scan Tool with V18.150.500 Piwis Tester 2 diagnostic software support diagnostic for Porsche till 2017. How to use the Piwis Tester II for Porsche diagnostic function? CnAutotool.com Share Piwis Tester 2 Diagnostic Application Guide as follows: Selecting Piwis 2 Basic…

How to install FVDI V2018 on Windows 7/8/10/XP?
23 Apr
8:17

How to install FVDI V2018 on Windows 7/8/10/XP?

FVDI 2018 can be installed on Windows 7/8/10/XP. Read step-by-step guide as follows. Part 1: Download FVDI V2018 Quick Loader V3.0, click here Part 2: Install FVDI V2018 software on Windows 7/8/10/XP After download above FVDI 2018 stic.zip Double click the FVDI 2018 software file on desktop Select English language Select…

How to update shell config. for Porsche Piwis3 Developer Mode
21 Apr
7:42

How to update shell config. for Porsche Piwis3 Developer Mode

Porsche Piwis III Developer Mode: The Developer Mode in Porsche Piwis Tester III is not available when you update the shell, coz you lose the menu diagnostics configuration to switch between regular and developer mode, Problem solved if you copy the old file com.porsche.piwis.Shell.exe.config Here is how to update the shell…