GM MDI Multiple Diagnostic Interface Without WIFI Card

Top 6 Reasons to Get for GM MDI:
1.Multi-Languages available:English, French, German,Italian.etc. Total 30 languages to choose.
2.Can do cars from 1990-2013 Year with OBD2 port.
(For diagnosis function,if use teachwin software,support 1996-2014 year.If use gds2 software,support 2009-2012 year.
For programming function,about 2006-2011 year.If you need programm newer cars,need customer have online account.)
3.Operating system:Windows XP,you can connect the computer through the USB or the ethernet cable.
4.Without WIFI Card(But does not include wifi card)
5.Support 2010-2012 year Australia Holden cars.
6.Software Version:
For GM MDI Software version: 7.14.30
GDS2 packet
For SAAB:V2011.10.0
For OPEL/VAUXHALL:V2011.10.0
For GM PREPROUTION:2011.11.3
For GDS2 software version:V9.1.01001

Notice:
1. GM MDI need activate,send us PDF file for activation.And please follow the install video.
2. When you install the mdi software, you need to disconnect with internet. Never try to click update and the Java cannot be update also, or some unknown error happens, cannot use the software then.
3. If you do the programming function and have to connect with internet, the software will indicate you to update software or update Java, do not try to click update them, just ignore the indication.

Newest features for GM MDI :

1. With opel Global tis global diagnostic system
2. Support offline lease function
3. Support Opel offline programming function
4. With GDS2 diagnostic system
5. Tech2win diagnostic software support adding latest software
6. support programming online
7. support cable communication
8. support wireless communication
9. support original factory latest software
10. With European Chevetl Global tis, Supports European Chevetl offline programming
11. All Chip are new and original

General Motors Global Electrical Architecture (Global A) and Global Diagnostic Hardware &Software
Global Diagnostic System DGS& Mutiple diagnostic Interface MDI

MDI and GDS Background

MDI is an interface between the vehicle DLC and a PC (by wired USB, wired Ethernet, wireless Ethernet ) and TIS2web.
Can be Used for SPS programming on existing and future SGM vehicles
Required for diagnostics on new SGM Global A Electrical Architecture Vehicles
Used with TIS2Web, GM Global Diagnostics System (GDS), SPS and MDI Manager Software
Allows for GDS diagnostic
GM Multiple Diagnostic Interface (MDI)
All current and most legacy vehicle protocols: UART, KW2000, CLASS2, GM LAN, etc.
Needed for Global A architechture vehicles
Supports Service Programming System (SPS)
Pass through progrmming on past model and Global A vehicles
Supports PC-Based diagnostics with rollout of the Global Diagnostic System (GDS) application
Includes Flight Recorder Mode

New Diagnostic Application Software Required for Global A Vehicles

Global Diagnostic System (GDS)
PC-based software diagnsotics
DTCs, Diagnostics, Data Display & Visualization, Device Controls, Special Tests, Flight Recorder management, etc.
GDS is software which runs on a specific PC. Updates received via TIS2Web.
Multiple display options. More space for diagnsotics. Session management for multiple us.

Future of The Tech 2

The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles fromprevious model years. Remote programming with the Tech 2 will continue to be supported for use on all 2007 and previous vehicles.Additional information will be supplied in future.

How will The MDI for GM Be Used?

The new  professional automotive diagnostic tool GM MDI can be used only in the Pass-Thru method. This means you can use it as your programming tool, while your Tech 2/CANDY remains available for diagnostics and other duties.

The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and will support all vehicles into the future.

The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008. Regulations require programming procedures to be compliant with SAE Recommended Practice J2534.

The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.

What Protocols Does The GM MDI Support?

For immediate use — At present, vehicles have two buses on the 16 pin connector (high speed and low speed GMLAN). The GM MDI communicates using all of the existing GM protocols, the same as the Tech 2:
– UART
– Class 2
– KWP2000
– GMLAN (CAN)

Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicles)

For GM MDI Package List:
1pc x MDI Main unit
1pc x OBD2 Cable
1pc x USB Cable
1pc x Lan Cable
1pc x AC Adapter
1pc x Screw (used to fix the usb cable when connecting usb cable with main unit)
1pc x CD Software

Display For GM MDI Language:
11-1

HOW WILL THE MDI FOR GM BE USED?
The new GM MDI can be used only in the Pass-Thru method. This means you can use it as your programming tool, while your Tech 2/CANdi remains available for diagnostics and other duties.
The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and will support all vehicles into the future.

The GM MDI Diagnostic Tool will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008.
Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.

What protocols does the MDI support?
For immediate use — At present, vehicles have two buses on the 16 pin connector
(high speed and low speed GMLAN). The GM MDI communicates using all of the existing GM protocols, the same as the Tech 2:
– UART
– Class 2
– KWP2000
– GMLAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicles.)

Notice: Factory can provide account for online programming, if you need, you need to reserve in advance(as factory only have one account)

Where to buy for GM MDI online programming software: http://www.cnautotool.com/
Where to login online programming website: https://www.autopartners.net/apps/sporef/tis2web.html
What’s the price of online programming:

11-2

MDI Connectors and Indicators (LEDs)

11-3

Host Computer Interface

Using the PC application MDI Manager software, you configure the MDI to communicate with a host computer. The MDI is capable of communicating over a USB cable, an ethernet cable (LAN), or wireless (WLAN),PC Connections on the MDI

11-4

Package including:

1pc x MDI Main unit
1pc x OBD2 Cable
1pc x USB Cable
1pc x Lan Cable
1pc x AC Adapter
1pc x Screw (used to fix the usb cable when connecting usb cable with main unit)
1pc x CD Software

PCB Board Pictures:

11-5
11-6
11-7

Be the first to comment

Leave a Reply

Your email address will not be published.


*