WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

The old bluetooth Caterpillar Electronic Technician has stopped production, and you may get the new WIFI CAT Caterpillar ET Diagnostic Interface adapter to replace it, CnAutotool.com has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.
WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

Auto Scanner Tools CAT Communications Adapter III 317-7485 may be the most current generation on the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is necessary for some CAT ET (Electronic Technician) functions.
Actual 2015A Caterpillar ET3 Adapter III P/N 317-7485 Skilled Diagnostic Adapter for CAT with WIFI
This really is the only encouraged communication device for Auto Repair Software program CAT, and also the only datalink device that should permit you to correctly communicate with a CAT engine on dual datalinks.
Software program version: 2015A

2015A Caterpillar ET3 Adapter III Communication:
1. Makes it possible for communication involving service tools and engine controls making use of different data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program permits adapter firmware upgrades as more attributes turn out to be obtainable;
3. Utilizes J1939/11, high-speed data link (a part of ADEM III controls), substantially minimizing flash occasions;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time around 80%, from 14 minutes to three minutes).
For anyone who is searching for wireless diagnostic interface for cat engines, please it is possible to pick this new WIFI CAT Caterpillar ET Diagnostic Tool III adapter from www.cnautotool.com , and you will get 5% off discount when you order it now.
Support car list of CAT Caterpillar ET Diagnostic Tool :

With the CAT Diagnostic Tool, you can:
View active and logged diagnostics
View events where irregularities occurred and were logged by the ECM
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously
Record and log performance data
Graph a group of status parameters
View the current configuration of an ECM
Change ECM configurations
Perform diagnostic tests
Perform calibrations
Print reports and diagnostic results
For some machine and engine products, additional functionality has been included with the service tool program

Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
– 2D and 3D Histogram plotting capability (engine software
support required).
– Custom Status screen groups
– Snapshots (Download and display snapshot data recorded by the
ECM)
– Configuration Aid that allows upload/download of same
configuration to multiple control modules

Customised Service Tool Options
Customized service tool name
Customized graphics for the splash screen and icons
Customized installation
Aftermarket differentiation, i.e., the tool for one customer does not work on the product of another customer.
Licensing options for customer management
Flash programming of the ECM(s)
Training demonstration allows familiarity with the tool’s primary functions without connecting to ECM(s)
Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)

PC, Communication Hardware, and Cable Requirements
To run the service tool, the next PC, communication hardware, and cable requirements must be met. NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.

PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of the available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280×1024 compatible)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.
Wi-Fi (for the Wireless Comm Adapter 3)

Minimum Configurations
PC containing a Pentium 2 GHz processor or greater
1GB RAM
500MB of an available hard disk drive
CD-ROM drive
Super VGA monitor or display (1024×768)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.